How should I face water in the gearbox of a Roots fan?
Roots fan in the process of using the gear box inside the water, then meet this situation should be how to solve it? On this issueRoots FansI'll take you through it.
1, the cooling water pipe rupture led to the tank into the water, in this case, we should stop in time, can not work again, if the cooling water pipe is broken, then this situation is very serious, after parking, you need to disassemble the tank, but also need to check the gears of the fan, to see if there is any damage to the situation.
In this case, you can only disassemble and repair the water-cooled pipe, after repairing, after testing, in the re-installation of the fan to check whether it can work properly.
2, idle wind machine oil tank into the water, if the idle fan, because of man-made reasons, caused by the fan gear box into the water, you can open the bottom of the oil tank drain holes, the inside of the lubricant and water emissions, and then placed for a few days, so that the inside of the water evaporation, and then again with lubricating oil to wash it again, the oil tank into the lubricating oil, after the disk of the belt pulley, the test run to see the effect, if there is a problem, to If there is any problem, stop the machine in time.
About “Roots fan gear box water should be how to face?” This issue is introduced to you here, if you still have questions you can visit our website to understand.
