Roots blower machine daily use details?
Roots blower in the process of use in order to ensure its better use there are some daily details need to pay attention to, these details mainly include what?Roots Blower MachineI'll take you through it.
1、Check the fastening of each part and the positioning pin for looseness;
2, Roots blower body internal whether there is water leakage, oil leakage phenomenon;
3, the three-leaf Roots blower body can not have internal scaling, rust and flaking phenomenon exists;
4, pay attention to the lubrication and cooling situation is normal, pay attention to the quality of lubrication. Often listen to the blower running with no noise. Pay attention to whether the unit is not in accordance with the provisions of the operating conditions;
5, the blower's overload, sometimes not immediately show up, so pay attention to the inlet and exhaust pressure, bearing temperature and motor current increase trend, in order to determine whether the machine is running normally;
6, Roots blower disassembly of the machine before the machine should be measured with the size of the machine, make a record, and make a good mark on the parts to ensure that the assembly to maintain the original with the requirements;
7, the blower bearings and gears using splash lubrication, it is recommended to use N68-N150 medium extreme pressure industrial gear oil users can also choose their own suitable lubricants, must ensure that the lubricant and the performance of the above lubricants are equivalent to the gears and bearings in order to facilitate the normal operation of the oil tank in the oil tank should be guaranteed to stop in the oil mark above the center line of the 3-5mm lubricants should be replaced regularly (the first time to start work 200 hours, change the first oil), and then every six months for oil change. The lubricating oil should be changed regularly (the first time when it starts to work for 200 hours, change the oil for the first time), and then change the oil every half a year. The oil tank and gears should be cleaned with neutral kerosene before filling new oil;
8, maintenance and overhaul should be based on the specific use of the development of a reasonable maintenance system, carried out on a regular basis, and records, it is recommended that an annual overhaul, and replacement of bearings and related wear parts.
