Roots blower belt slippage should be how to solve?
Roots BlowerIn the process of using the belt slipping situation, then how to solve this situation? Roots blower small editor to take you to understand.
In the absence of the same specification belt replacement, can only choose to emergency treatment methods, such as boiling water hot belt or change the method of rosin. Although useful, but can not deal with the fundamental problem. Will slip the belt cut, cut off 1 ~ 5 mm, and then cut the break into a beveled surface, cleaned with alcohol, and then with the Beijing production of 502 adhesive glue, placed l hours later, such as drying can be used normally, it is worth paying attention to, it is necessary to use the Beijing Yulong 502 adhesive, other brands 502 dehydration is not easy to stick. This method is only useful for rubber belts. Sometimes the rubber belt is too fine to glue the strength of the belt. Cotton thread can be used to reinforce the break near the stick. Beware of cotton thread length should not be too long.
About “Roots blower belt slippage should be how to solve?” I will introduce you here, if you still have questions you can visit our website to consult the understanding.
